News - ISOLOC informs!

"Nothing is more consistent than change." According to this motto we act and try to optimize constantly our products and services and to develop new products that offer more profit to our customers and partners.

The new, patented ISOLOC MULTIDAM
machine mounting system for especially demanding requirements in vibration insulation and vibration damping.

You can download the 3D models now.

Please visit our "service and download" area.

Please visit our service and download area.

In the downloading area of the ISOLOC website you can find a new category "download 3D models in STEP and IGES format" where 3D drawings of our NT, NTS levelling elements and screws in two current formats are available.

The new, patented ISOLOC MULTIDAM machine mounting system for especially demanding requirements in vibration insulation and vibration damping as well as good machine stability in vertical and horizontal direction.

In the downloading area of the ISOLOC website you can find a new category "download 3D models in STEP and IGES format" where 3D drawings of our UMS machine shoes in two current formats are available.

The new machine shoe UMS45 in patented construction is suitable for loads up to 600 000 N (approx. 60 t), with vibration insulation up to 450 000 N. And this with an extremely compact construction. Level easy and precise, as usual. You can find more information at "products/machine shoes".

The use of the ERGOPUR mats reduces physical stress of standing jobs up to 60 percent. The ERGOPUR mat was examined at the Institut for Ergonomy, Munich/Germany, and evaluated as "good". Just test it! Call us or send us an e-mail at "contact".

For the vibration insulated installation of heavy presses. With these system solutions it is possible to install presses e. g. from SMS Eumuco, Müller-Weingarten, Schuler etc. with a weight over 3 500 kN insulated and damped from vibrations - with small downward deflection and headroom. Thus, presses can be refitted with a vibration insulation without the high costs of base enlargements of the foundation that have been necessary so far.

Because of permanently changing requirements to constructions and the increasing influence of lightweight constructions, especially in the machine-tool construction, more and more exact models are necessary to describe mechanical systems. Vibratory mechanical systems are modelled by masses, rigidities and dampings. Due to the increasing significance of the estimation as precise as possible of the model parameters the computer aided measuring and analysis of dynamic component characteristics plays a more and more important role. Thus it is possible to define exactly the constructively weak points of a machine and to dimension an effective remedial measure. The actual behaviour of a system can only be ascertained basing on experimental examinations. If you require more information or a quotation about this service please contact us; we are pleased to consult you.

Highly sensitive X-ray electron microscopes were installed on 4-axis MULTIDAM elements. So far expensive air spring elements had been used for these microscopes. Thanks to the use of the ISOLOC MULTIDAM elements, the required limit values for vibrations could be met - and that with notably lower costs!

Six machining centres
type SW BA400-2 CNC
weight: 120 000 N
feed: 1 - 40 000 mm/min.
number of revolutions: up to 17 500 min-1
dimensions: 4,6 x 3,0 x 3,0 m

were relocated on UMS machine bearing systems. The required surface roughness was not achieved with the usual rigid installation. With ISOLOC the Rz-roughness was improved by 26,7 % amongst others.

For the first time, WFL Millturn machines were installed on upper floors on ISOLOC machine bearing sytems. Enormous costs of the installation and foundation (no support of the ceiling necessary) could be saved.

At Volkswagen, works Kassel, 16 machining centres (m = approx. 30 t) were placed elastically and damping, for the first time without fixation, on ISOLOC UMS machine shoes (pat.) on a ceiling in October 2002. In spite of the elastic characteristics of the ceiling these machining centres work with the required precision and productivity.

Mounting of Edel portal milling machines, type Koordinatic, weight approx. 300 kN incl. mobile portal with 90 kN, on ISOLOC UMS machine shoes (pat.). Measurings have shown that the KV-factor had been raised 3 times and the productivity as well as the precision had been increased significantly.

Many of the new machining centre DMU 340 with a total weight of approx. 900 kN is mounted on 3 pieces precision machine shoes, double-wedge version, UMSD35(special)-ASA/BV750x600/3050 U.

Truning and milling centre type C42 is installed free-standing on ISOLOC machine shoes UMS8. Along with the vibration insulation, the surface of the workpieces and the dynamic behaviour of the machine have demonstrably been improved.

Hermle AG equips in series the 5-axes machining centre C40U with NC round pivot table with ISOLOC UMS machine shoes.